Molding
For the molding process, I used the EasyMold molding putty.
I mixed the dark blue and white liquid together in equal amounts. Stir thoroughly. Ensure that the final result of the mixture is light blue in colour. As a safety precaution, I wore gloves to protect my skin from the chemicals. Next, I put the the slicone mixture in the degassing crucible to allow the pockets of air to escape from the mixture.
Once the silicone mixture has been fully degassed, cure the silicone for at least 5 hours and wait for it to solidify.
Casting
After a few hours of waiting, I mix the hardener and epoxy resin mixture also in equal amounts, degass it and pour it into our mold. I waited 5 hours for it to cure.
This will be the final result.
